Development Of Analytical Methods Research Articles

Analytical Method Development and Dermal Absorption of 4-Amino-3-Nitrophenol (4A3NP), a Hair Dye Ingredient under the Oxidative or Non-Oxidative Condition

The chemical 4-amino-3-nitrophenol (4A3NP) is classified as an amino nitrophenol and is primarily utilized as an ingredient in hair dye colorants. In Korea and Europe, it is exclusively used in non-oxidative or oxidative hair dye formulations, with maximum allowable concentrations of 1% and 1.5%, respectively. Despite this widespread use, risk assessment of 4A3NP has not been completed due to the lack of proper dermal absorption data. Therefore, in this study, both the analytical method validation and in vitro dermal absorption study of 4A3NP were conducted following the guidelines provided by the Korea Ministry of Food and Drug Safety (MFDS). Before proceeding with the dermal absorption study, analytical methods were developed for the quantitation of 4A3NP through multiple reaction monitoring (MRM) via liquid chromatography-mass spectrometry (LC-MS) in various matrices, including swab wash (WASH), stratum corneum (SC), skin (SKIN, comprising the dermis and epidermis), and receptor fluid (RF). These developed methods demonstrated excellent linearity (R2 = 0.9962–0.9993), accuracy (93.5–111.73%), and precision (1.7–14.46%) in accordance with the validation guidelines.The dermal absorption of 4A3NP was determined using Franz diffusion cells with mini-pig skin as the barrier. Under both non-oxidative and oxidative (6% hydrogen peroxide (H2O2): water, 1:1) hair dye conditions, 1% and 1.5% concentrations of 4A3NP were applied to the skin at a rate of 10 μL/cm2, respectively. The total dermal absorption rates of 4A3NP under non-oxidative (1%) and oxidative (1.5%) conditions were determined to be 5.62 ± 2.19% (5.62 ± 2.19 μg/cm2) and 2.83 ± 1.48% (4.24 ± 2.21 μg/cm2), respectively.

Quantitative analysis of oxygen heterocyclic compounds using liquid chromatography coupled to tandem mass spectrometry, method development and environmental assessment

The latest trends in the field of laboratory method development concern the validation of fast procedures, and the safety of the operator and environment. The present research is focused on the development of fast and environmentally-friendly analytical method of liquid chromatography-triple quadrupole mass spectrometry for the determination of oxygen heterocyclic compounds in Citrus-flavored products. To the best of the authors’ knowledge, this is the first approach for the characterization of thirty-six oxygen heterocyclic compounds in less than four minutes using water/ethanol as mobile phase. Molecules were characterized in Citrus essential oils and beverages. Figures of merit determined were linearity, precision, limits of detection and quantification. The method was compared in terms of greenness with our two methodologies previously published for analysis of oxygen heterocyclic compounds. The analytical greenness metric approach and the “RGB model” were used. According to these approaches, the method proposed here is faster, safer and more eco-friendly.

Analytical method development and dermal absorption of gallic acid, a hair dye ingredient

Analytical method development and dermal absorption of gallic acid, a hair dye ingredient

Current problems in the field of structure, properties of minerals and methods of their investigation

The main goal of research into the structure and properties of minerals, as well as their crystal chemistry and physics, consists in obtaining fundamental information about the actual atomic and electronic structure of mineral objects and physical regularities of their transformations under the influence of external factors (temperature, pressure, radiation, and environmental chemistry). Such information forms the basis for mineral typification and restoration of mineral crystallization conditions and their evolution in a certain geological situation. This information is widely used in petrogenetic and geochronological constructions. Such studies are also relevant to the development of nature-like technologies for obtaining new promising functional materials. Knowledge of the structure, crystal chemistry, and physics of minerals, typomorphism of their spectroscopic properties, as well as the development of analytical techniques and methods for the synthesis of mineral-like materials are of particular significance. This thematic issue of the Lithosphere journal aims to review of these problems in the context of the materials reported at the XIII All-Russian Scientific Conference “Minerals: Structure, Properties, Research Methods” held in 2023 at the Institute of Geology and Geochemistry of the Ural Branch of the Russian Academy of Sciences in Yekaterinburg.

Resolving the vicinity of supermassive black holes with gravitational microlensing

Abstract Upcoming wide field surveys will discover thousands of new strongly lensed quasars which will be monitored with unprecedented cadence by the Legacy Survey of Space and Time (LSST). Many of these quasars will undergo caustic-crossing events over the 10-year LSST survey, during which the quasar’s inner accretion disc crosses a caustic feature produced by an ensemble of microlenses. Such caustic-crossing events offer the unique opportunity to probe the vicinity of the central supermassive black hole, especially when combined with high cadence, multi-instrument follow-up triggered by LSST monitoring. To simulate the high cadence optical monitoring of caustic-crossing events, we use relativistic accretion disc models which leads to strong asymmetric features. We develop analysis methods to measure the Innermost Stable Circular Orbit (ISCO) crossing time of isolated caustic-crossing events and benchmark their performance on our simulations. We also use our simulations to train a Convolutional Neural Network (CNN) to infer the black hole mass, inclination angle, and impact angle directly from these light curves. As a pilot application of our methods, we used archival caustic-crossings of QSO 2237+0305 to estimate the black hole mass and inclination angle. From these data, two of these methods called the second derivative and wavelet methods measure an ISCO crossing time of 48.5 and 49.5 days, corresponding to a Kerr black hole mass of MBH = (1.5 ± 1.2) × 109M⊙ and MBH = (1.5 ± 1.3) × 109M⊙ respectively. The CNN inferred log10(MBH/M⊙) = 8.35 ± 0.30 when trained on Schwarzschild black hole simulations, and a moderate inclination of i = 45 ± 23○. These measurements are found to be consistent with previous estimates.

Gas chromatography-stable isotope ratio mass spectrometry prior solid phase microextraction and gas chromatography-tandem mass spectrometry: development and optimization of analytical methods to analyse garlic (Allium sativum L.) volatile fraction

Garlic (Allium sativum L.) is not only appreciated for its flavour and taste, but it is also recognized for various health properties. The European Commission, through the attribution of the Protected Designation of Origin (PDO) certification mark, has officially recognized some specific varieties of garlic. To protect not only the commercial value but also the reputation of this appreciated product, effective tools are therefore required. For the first time, a new compound specific isotope analysis method based on carbon stable isotopic ratio measurement of the three major volatile garlic compounds allyl alcohol (AA), diallyl disulphide (DD) and diallyl trisulphide (DT) through head-space solid phase microextraction (HS-SPME) followed by gas chromatography-combustion-isotope ratio mass spectrometry (GC-C-IRMS) was developed. A within-day standard deviation (Srwithin-day) of 0.3‰, 0.4‰ and 0.2‰ for δ(13C) and a between-day standard deviation (Srbetween-day) of 0.8‰, 1.0‰ and 0.6‰ of AA, DT and DD was estimated. For the first time, the ranges of isotopic variability for the three volatile compounds of red garlic from two neighbouring Italian regions (Abruzzo and Lazio) were defined analysing 30 samples. The same dataset was also considered in analysing the percentage composition of the previously mentioned three volatile compounds through gas chromatography-tandem mass spectrometry (GC-MS/MS). The two analytical approaches were combined in this explorative study, aiming to provide potential parameters to discriminate garlic samples based on their geographical origin.

Procjena utjecaja matriksa na kvantifikaciju lipofilnih toksina u plodovima mora

Phycotoxin accumulation in seafood can cause human intoxication and significant economic losses in seafood-producing areas. To protect consumer safety, maximum permitted levels in bivalve molluscs have been set, with appropriate analytical methods for their determination and quantification. The reference method for lipophilic phycotoxins, commonly referred to as lipophilic toxins, is liquid chromatography tandem mass spectrometry (LCMS/MS method), where coeluting components from the matrix can affect the efficiency of ionisation, resulting in erroneous quantification. In this study, the matrix effect was evaluated using the slope ratio analysis method, which involves comparing the slopes of the calibration curves in the matrix with those in pure solvent. The extent of the matrix effect was investigated in mussels, oysters, queen scallops and ascidians. The study covered all phycotoxins under Regulation EU 853/2004 for which certified standards are commercially available, including unregulated pectenotoxin 2. The results indicated that all lipophilic toxins were susceptible to this effect when LC-MS/MS was used for their determination. Significant ion suppression was evident for most analytes in all matrices, except for okadaic acid and dinophysistoxin 2 in bivalves, where significant ion enhancement was demonstrated, and dinophysistoxin 1 in oyster and scallop extract where no significant effect on ionisation was observed. Further analysis revealed no significant differences between the slope of mussel matrix-matched calibration and that of other bivalve matrices. Given this minor difference, the mussel matrix-matched calibration curve could be applied to minimise the matrix effect and to quantify phycotoxins in bivalve matrices analysed here, with the exception of the okadaic acid group in ascidians, which requires matrix-matched calibration prepared with the blank extract of these mentioned species. Given the risks phycotoxins pose to human health, ongoing analytical method development is necessary in this field to properly control food safety and ensure consumer health.

Influence of oligonucleotides structures for separation of diastereomers by capillary electrophoresis method using polyvinylpyrrolidone 1,300,000

In the field of oligonucleotides drug discovery, phosphorothioate (PS) modification has been recognized as an effective tool to overcome the nuclease digestion, and generates 2n of possible diastereomers, where n equals the number of PS linkages. However, it is also well known that differences in drug efficacy and toxicity are caused by differences in stereochemistry of oligonucleotides. Therefore, the development of a high-resolution analytical method that enables stereo discrimination of oligonucleotides is desired. Under this circumstance, capillary electrophoresis (CE) using polyvinylpyrrolidone (PVP) is considered as one of the useful tools for the separation analysis of diastereomers.In this study, we evaluated the several oligonucleotides with the structural diversities in order to understand the separation mechanism of the diastereomers by CE. Especially, five kinds of 2′-moieties were deeply examined by CE with PVP 1,300,000 polymer solution. We found that different trend of the peak shapes and the peak resolution were observed among these oligonucleotides. For example, the better peak resolution was observed in 6 mer PS3-DNA compared to the rigid structure of 6 mer PS3-LNA. As for this reason, the computational simulation revealed that difference of accessible surface area caused by the steric structure of thiophosphate in each oligonucleotide is one of the key attributes to explain the separation of the diastereomers. In addition, we achieved the separation of sixteen peak tops of the diastereomers in 6 mer PS4-DNA, and the complete separation of fifteen diastereomers in 6 mer PS4-RNA. These knowledge for the separation of the diastereomers by CE will be expected to the quality control of the oligonucleotide drugs.

Stability indicating high performance thin layer chromatography method development and validation for quantitative determination of tetracycline hydrochloride in tetracycline hydrochloride active pharmaceutical ingredient (API) and its dosage forms

Simple, quick, cost-effective, and environmentally friendly analytical methods for quality assurance and control roles for different medicines, including Tetrcyclines, are most significantly needed. Also, different thin layer chromatography (TLC)-based methods for tetracycline identification exist, but high performance thin layer chromatography methods based on modern state- of- the art equipment are still nonexistent. Thus, in this study, analytical method development and verification were done by high performance thin layer chromatography (HPTLC) (using an automated equipment model) using glass plates coated with silica gel 60 F254 after treating with 10% Na2EDTA. Validation was carried out according to International Council for Harmonization (ICH) guidelines. A mobile phase formed from ethyl acetate, acetonitrile, methanol, and 1% aqueous ammonia in the composition of 4.4:19.6:10:6 volume to volume ratio (V/V) was used. Rf value, percentage recoveries, linearity ranges, limit of detection (LOD), and limit of quantitation (LOQ) for the developed HPTLC method were 0.28, 100.83–106.25%, 160–560 ng/band (r2 values of 0.9999), 31.9 ng/band, and 96.7 ng/band, respectively. The results of the sample assays conducted using the new method and the United States Pharmacopoeia (USP) high performance liquid chromatography (HPLC) method were 91.59% to 108.3% and 90.83% to 102.85%, respectively. The F test for the aforementioned methods was 2.01, which is smaller than the tabulated F value of 5.05 with 5 degrees of freedom at a 95% confidence range, proving that the newly developed HPTLC and HPLC pharmacopoeial methods can be used interchangeably.The newly developed HPTLC method is easy, economical, specific, accurate, and roboust, thus it can be employed in a range of settings that require quality control and assurance activities of tetracycline hydrochloride (TC-HCl) in bulk and ointment dosage forms.

Recent progresses in analytical method development for 210Pb in environmental and biological samples.

As a decay product of uranium series, 210Pb spreads widely in the nature and imposes strong radiological and chemical toxicity. It is vital to establish reliable and efficient radioanalytical methods for 210Pb determination to support environment and food radioactivity monitoring programs. This article critically reviews analytical methods developed for determining 210Pb in environmental and biological samples, especially new development in recent years. Techniques applied throughout different analytical steps including sample pretreatment, separation, purification, and detection are summarized and their pros and cons are discussed to provide a holistic overview for 210Pb environmental and biological assay.

Organophosphate esters and their metabolites in marine fish from Vietnam: Analytical method development and validation

Organophosphate esters (tri-OPEs), which are a significant group of emerging organic pollutants, have been widely found in aquatic products worldwide. While tri-OPEs have been extensively detected in aquatic products and are known to represent potential risks to human health, there is limited information available regarding their metabolites (di-OPEs). Currently, the techniques for analyzing the composition of tri- and di-OPEs have been distinguished and have certain drawbacks in terms of their expense, time requirements, and reliability. The objective of the study is to develop, validate, and utilize a modified QuEChERS technique for extracting tri- and di-OPEs in marine fish. As a result, EMR-Lipid and WAX were selected as adsorbents for the QuEChERS method to purify the samples and a combination of centrifugal vacuum and nitrogen at a temperature of 1 °C was selected as a technique to enhance the sensitivity of the developed method. The parameters of the method validation are in accordance with the criteria specified in SANTE/11312/2021 (a recovery ranging from 84.0% to 107.4% and RSD of precision below 20%). The aforementioned methodology was employed to assess the tri-OPEs and their metabolites in a total of 72 fish muscle samples obtained from the presence of OPEs in all recorded instances. The average concentration of ΣOPEs was determined to be 87.4±55.0 ng/g dw, with TBOEP and BEHP identified as the predominant compounds. Furthermore, no significant variation in the content of tri- and di-OPEs was observed in fish samples, regardless of species or geographical location.

Rapid, Simple and Low-Cost Analytical Method Development for Quantification of Eltrombopag Olamine in Tablet dosage by UV Spectroscopy Method

Rapid, Simple and Low-Cost Analytical Method Development for Quantification of Eltrombopag Olamine in Tablet dosage by UV Spectroscopy Method

Analytical Method Development and Validation of Brivaracetam in API and Marketed Formulation by RP-HPLC

A rapid and precise reverse phase high performance liquid chromatographic method has been developed for the validated of brivaracetam in its pure form as well as in tablet dosage form. Chromatography was carried out on a Symmetry ODS RP C18,5mm, 15mm x 4.6mm column using a mixture of phosphate buffer: methanol: acetonitrile (30:35:35% v/v) as the mobile phase at a flow rate of 1.0ml/min, the detection was carried out at 285 nm. The retention time of the brivaracetam was 2.183. The method produces linear responses in the concentration range of 60-140μg/ml of brivaracetam. The method precision for the determination of assay was below 2.0%RSD. The method was found to be sensitive, accurate and precise useful in the quality control of bulk and pharmaceutical formulations.  

Application of a Heuristic Framework for Multilevel Interventions to Eliminate the Impact of Unjust Social Processes and Other HarmfulSocial Determinants of Health.

There is consensus about the importance of developing a strong cadre of effective multilevel interventions to eliminate the impacts of unjust social processes, such as structural racism and other harmfulsocial determinants of health (SDOH), on health inequities in the USA. However, the available cadre of rigorously evaluated evidence-based interventions for SDOH mitigation remains underdeveloped relative to the magnitude of historic and current health inequities. The proposed manuscript addresses this gap in two ways: first, by introducing a heuristic framework to inform decisions in multilevel intervention development, study design, and selection of analytic methods and, second, by providing a roadmap for future applications of the framework in multilevel intervention research through an exemplar application using the ongoing NIH-funded evaluation study of the Nurse-Community-Family Partnership (NCFP) intervention. NCFP leverages individual, family, institutional, and system factors to shape COVID-19 mitigation outcomes at the individual and household levels. NCFP takes an approach informed by the heuristic framework to addressing and mitigating unjust social processes and other harmful SDOH. We discuss the application of a two-arm parallel explanatory group randomized trial to evaluate the efficacy of NCFP in improving the primary (COVID-19 testing uptake) and secondary (adoption of COVID-19 control measures, COVID-19 vaccine uptake, mutual aid capacity, etc.) outcomes at the individual and household levels. The analysis approach relies on random-intercept models, and we calculate the variance partitioning coefficient to estimate the extent to which household- and individual-level variables contribute to the outcome, allowing examination of NCFP effects at multiple levels.

Quantification of quaternary ammonium compounds by liquid chromatography-mass spectrometry: Minimizing losses from the field to the laboratory

Quaternary Ammonium Compounds (QACs) are widely used in household, medical and industrial settings. As a consequence, they are ubiquitously found in the environment. Although significant efforts have been put into the development of sensitive and reproducible analytical methods, much less effort has been dedicated to the monitoring of QACs upon sample storage and sample preparation. Here we studied the effect of storage, concentration, and extraction procedures on the concentrations of QACs in samples. Thirteen QACs selected amongst benzalkonium compounds (BACs), dialkyldimethylammonium compounds (DADMACs) and alkyltrimethylammonium compounds (ATMACs) were quantified in aqueous and solid samples using LC-MS/MS. Most QACs adsorbed on container walls could be recovered using a short washing step with MeOH containing 2 % v/v formic acid. Concentrations of QACs from aqueous solutions using solid phase extraction (SPE) with Strata-X cartridges and elution with acidified MeOH utilized to wash the emptied containers gave highly satisfactory recoveries (101–111 %). Good recoveries (89–116 %) were also obtained when extracting a spiked organic-rich synthetic soil using accelerated solvent extraction (ASE) with acidified MeOH at low solid/solvent ratio (0.4 g/20 mL). Applying the recommended methodologies to real samples collected from a Canadian wastewater treatment plant (WWTP) gave QAC concentrations in the ranges of 0.01–30 µg/L, < 1.2 µg/L, and 0.05–27 mg/kg for the influent, effluent and biosolids samples, respectively.

Development of a High-Throughput Analytical Method for Antimicrobials in Wastewater Using an Automated Pipetting and Solid-Phase Extraction System.

Antimicrobial resistance (AMR) has emerged and spread globally. Recent studies have also reported the presence of antimicrobials in a wide variety of aquatic environments. Conducting a nationwide monitoring survey of AMR in the environment to elucidate its status and to assess its impact on ecosystems and human health is of social importance. In this study, we developed a novel high-throughput analysis (HTA) system based on a 96-well plate solid-phase extraction (SPE), using automated pipetting and an SPE pre-treatment system. The effectiveness of the system as an HTA for antimicrobials in environmental water was verified by comparing it with a conventional manual analytical system in a domestic hospital over a period of two years and four months. The results of the manual analysis and HTA using a combination of automated pipetting and SPE systems were generally consistent, and no statistically significant difference was observed (p > 0.05) between the two systems. The agreement ratios between the measured concentrations based on the conventional and HTA methods were positively correlated with a correlation coefficient of r = 0.99. These results indicate that HTA, which combines automated pipetting and an SPE pre-treatment system for rapid, high-volume analysis, can be used as an effective approach for understanding the environmental contamination of antimicrobials at multiple sites. To the best of our knowledge, this is the first report to present the accuracy and agreement between concentrations based on a manual analysis and those measured using HTA in hospital wastewater. These findings contribute to a comprehensive understanding of antimicrobials in aquatic environments and assess the ecological and human health risks associated with antimicrobials and antimicrobial-resistant bacteria to maintain the safety of aquatic environments.

Development of an innovative analytical method for forensic detection of cocaine, antidepressants, and metabolites in postmortem blood using magnetic nanoparticles.

Cocaine and antidepressants rank high globally in substance consumption, emphasizing their impact on public health. The determination of these compounds and related substances in biological samples is crucial for forensic toxicology. This study focused on developing an innovative analytical method for the determination of cocaine, antidepressants, and their related metabolites in postmortem blood samples, using unmodified commercial Fe3O4 nanoparticles as a sorbent for dispersive magnetic solid-phase extraction (m-d-SPE), coupled with liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS) analysis. An aliquot of 100 µL of whole blood and 5 µL of the internal standard pool were added to 30mg of nanoparticles. The nanoparticles were separated from the sample using a neodymium magnet inserted into a 3D-printed microtube rack. The liquid was then discarded, followed by desorption with 300 µL of 1/1/1 acetonitrile/methanol/ethyl acetate. The sample was vortexed and separated, and 1.5 µL of the organic supernatant was injected into the LC-MS/MS. The method was acceptably validated and successfully applied to 263 postmortem blood samples. All samples evaluated in this study were positive for at least one substance. The most frequent analyte was benzoylecgonine, followed by cocaine and cocaethylene. The most common antidepressants encountered in the analyzed samples were citalopram and fluoxetine, followed by fluoxetine's metabolite norfluoxetine. This study describes the first report of this sorbent in postmortem blood analysis, demonstrating satisfactory results for linearity, precision, accuracy, and selectivity for all compounds. The method's applicability was confirmed, establishing it as an efficient and sustainable alternative to traditional techniques for forensic casework.

Professor Carla Bottoli, an enthusiastic scientific researcher, kindly spoke to BrJAC

Carla Beatriz Grespan Bottoli holds a degree in Industrial Chemistry from the Federal University of Santa Maria (1996), as well as a Ph.D. in Chemistry (2002), and a postdoctoral degree in Chemistry (2002-2004), both from the State University of Campinas (Unicamp). In 2005, she undertook an internship at the Institute of Nuclear Sciences of the National Autonomous University of Mexico (UNAM) to study radiolysis in vitamins using gamma radiation from a source of Cobalt 60. In 2017, she presented her habilitation thesis (associate professor's thesis) at Unicamp. Currently, she is Associate Professor and Postgraduate Advisor at the Institute of Chemistry at Unicamp (IQ-Unicamp), where she works in the area of analytical chemistry, with emphasis on separation methods, mainly liquid chromatography. Prof. Bottoli coordinates the NovaCrom – Liquid Chromatography Laboratory (https://novacromlab.wixsite.com/novacrom), which is a research group that has been working on the development of new monolithic stationary phases for capillary liquid chromatography. Research is also focused on the development of analytical methods that employ liquid chromatography coupled with mass spectrometry to study the translocation of pesticides in plants such as coconut, palm, and soybean. Between 2019 and 2021, Prof. Bottoli was an associate coordinator of the Research Commission of the IQ-Unicamp and is currently a member of the Research Integrity Commission at Unicamp. She is a member of the Brazilian Chemical Society and a researcher at the National Institute of Science and Technology in Bioanalytics (INCTBio). Carla Bottoli is the mother of Murilo, 13 and Mateus, 10.

Analytical Method Development and Validation of a UV‐Spectrophotometric Technique for Pioglitazone HCL Estimation in Bulk and Polymeric Nanoparticles

AbstractThe type 2 diabetes drug pioglitazone is encapsulated in polymeric (Chitosan/PEG blended PLGA) nanoparticles utilizing solvent evaporation methods. The current research aimed to develop and validate an accessible, accurate, fast, and commercial UV spectrophotometric approach for assessing Pioglitazone in bulk and polymeric nanoparticles. In the estimation method that involves a pH 7.4 phosphate buffer, the maximum absorbance of Pioglitazone is reported to be 269 nm. With a correlation coefficient of 0.999, the drug exhibits linearity in the concentration series of 5–60 µg mL‐1. The proposed technique is validated as per ICH guidelines for linearity, accuracy, precision, and ruggedness. When the proposed technology is used in nano‐formulation, the percent amount of drug estimated to be 99.35% agreed well with the label claim. Recovery experiments at three distinct levels, 50%, 75%, and 100% are used to test the method's accuracy. The recovery rate is estimated to be between 98.91% and 99.11%. The low percent relative standard deviation (RSD) value indicates the method's accuracy and reproducibility. The method's repeatability, intraday, and interday precision are all examined. The approach is precise if the percent RSD value is less than 2. With the assistance of two analysts, the ruggedness of the suggested method is investigated. For the scheduled examination of Pioglitazone in bulk and polymeric nanoparticles, the above process has been developed and validated and proved to be a quick and cost‐effective quality‐control tool in pharmaceuticals.

A novel albumin-based supramolecular biosensor for ratiometric on-site determination of buprofezin

Buprofezin (BUP) is an effective insecticide against Homopteran and Thysanoptera pests. However, exposure to BUP may result in several harmful effects on the non-target organism including human body, such as hepatotoxicity and DNA damage. Therefore, development of a reliable analytical method for BUP holds paramount importance. This study presents a novel albumin-based supramolecular biosensor, DPP@ALB, designed for the sensitive detection of BUP in environmental matrices, including water, soil, and real food samples. The features of this biosensor include a fast response, high sensitivity, and visually detectable fluorescence color change, enabling on-site detection of BUP based on the portable paper strips and 3D-printed miniaturized testing system. Overcoming challenges associated with the low chemical reactivity of BUP, this supramolecular biosensor emerges as the very first fluorescent sensor for efficient and reliable monitoring of BUP with applications in broader areas of environmental analysis and food safety.